(NOT MADE IN CHINA) Another neat timer! 2 3/4" square by 1 5/8" deep. Driven by quartz controlled stepper motor (1 second in 24 hr accuracy! This model will loose time if disconnected from prower source, but easy to reset (just move the hands). Program disc with 144 switch actuators per 24-hr. Programmable every 10 minutes. Extremely simple and fast setting. Indication of switch-on period by red disc section and connection by trip-tab terminals. Time of day is very visible via the hands on the dial. The whole dial is covered with removable clear lens. Set time of day by rotating a center glass panel. Easy programming by moving the switch actuators. Will work with a voltage range of 48VDC or EVEN AC from 110v to 240v! Its current draw is next to none at 1.9 milliamp. Single-pole-double-throw (one normally closed and other normally open) switch rating is 16 Amps/250V. THIS TIMER CAN GIVE YOU UP TO 3 ON-OFF cycles per hour and 72 PER 24 HOURS! EASY MOUNTING: JUST OPEN THE ENCLOSURE, CONNECT WIRES TO SCREW TERMINALS, RUN THEM THOUGH PUNCH-OUT PLUGS (BACK OR BOTTOM), AND MOUNT BOX WITH 2 SCREWS THROUGH BACK WALL OR USE DOUBLE-STICK TAPE. TIMER MUST BE WELL SHELTERED IF USED OUTDOORS. STILL NOT SURE ABOUT WHAT IT WILL DO? CALL US AT 615-470-5596 OR E-MAIL AT firstname.lastname@example.org
NOTE: THIS ELECTRONICS ITEM IS NOT RETURNABLE AFTER USE, UNLESS OF COURSE IT IS OBVIOUS THAT THE TIMER DOES NOT FUNCTION PROPERLY AND HAS NOT BEEN IMPROPERLY WIRED OR DAMAGED ELECTRICALLY OR OTHERWISE, IN WHICH CASE WARRANTY OF 90 DAYS FROM PURCHASE DATE WOULD APPLY. PLEASE CHECK THE SPECS AND MAKE SURE IT WILL WORK FOR YOUR APPLICATION IF USED FOR PURPOSE OTHER THAN OUR SUPER FEEDERS. IF IN DOUBT, CONTACT US AND WE WILL TRY AND HELP YOU OUT. Non-exchanged, functional timers returned for refund will be assessed a re-stocking fee of $20.00 Furthermore, refunds will not include original S&H.