(NOT MADE IN CHINA) You have finally found a high quality and DEPENDABLE 12VDC timer. his unit is complete with enclosure which is about 3" square by 2 1/2" thick. Enclosure mounts to a surface with two screws from the inside back wall and has punch-out plugs below for wires. All you'll need to do is hook-up wires to the internal screw terminals. This 7-Day 12 Volt DC timer has an internal 5-year battery back-up for program/time hold when disconnected from your main battery. This 7-Day 12 Volt DC timer (with internal 5-year battery back-up for program/time hold when disconnected from your main battery) can be operated by any 12 volt battery and has an internal 16A rated SPST relay to provide your SuperFeeder (OR OTHER PURPOSE) with up to 16 daily cycles if used for all 7 days of the week (8 on/off daily programs, or a total weekly of 16 cycles (8 on-off cycles) for individual or groups of days of the week. Power consumption with timer relay NOT energized is next to none at 90-124 micro amps. With its internal relay energized it is also minimal at 33-49 MA. You can program these events Mon thru Fri, Sat and Sun, all days of the week or particular days of the week. ie., "on" and "off" Monday morning, "on" that afternoon, and "off" several days later, etc...Timer's minimum "on" time is 1 minute increments, NOT SECONDS. If shorter time is needed, and you are good at hooking up electrical things, it can be used along with one of our own PCB'S solid state timers to reduce "on" time down into split second increments, if needed as long as load does not exceed pc board rating. If it does, you may use a secondary relay (SEE "RELAYS" PAGE). This timer should be kept out of direct weather elements if used outdoors (not waterproof). For more info, SEE OUR REGULAR WEB SITE AT:

http://www.super-feed.com/dctimer.html

For specs sheet on this item see:

http://www.super-feed.com/dctimerspecs.htm

NOTE: THIS ELECTRONICS ITEM IS WARRANTED FOR 90 DAYS FROM DATE OF PURCHASE, IF IT IS OBVIOUS THAT THE TIMER DOES NOT WORK PROPERLY AND HAS NOT BEEN DAMAGED ELECTRICALLY OR OTHERWISE. IF, UPON INSPECTION BY THE FACTORY, IT IS FOUND TO BE DEFECTIVE, YOU WILL RECEIVE A REFUND OF THE TIMER PRICE OR A REPLACEMENT AT THAT TIME. PLEASE CHECK THE SPECS AND MAKE SURE IT WILL WORK FOR YOUR APPLICATION IF USED FOR PURPOSE OTHER THAN A SUPER FEEDER. IF IN DOUBT, CONTACT US AND WE WILL TRY AND HELP YOU OUT. If returned for any other reason other than malfunction, there will be a $20 re-stocking fee. WE NORMALLY SHIP WITHIN 24 HOURS OR ORDER RECEIPT.