Great Pack to remotely and simultaneously trigger two Super Feeders at same exact time via Wi-Fi together or separate areas within range of your home Wi-Fi source! Complete Wi-Fi single Super Feeder combos are also available with discounted bundled accessories. For Wi-Fi control, we have tested and recommend this smart plug for mobile devices running iOS 8 or higher, Android 4.1 or higher with existing Wi-Fi network. Up to 15 on-off cycles meaning you'll have up to 16 meals per day available. You may of course manually operate the Super Feeder for a few seconds to give your pets a few snacks in-between main meals.
Suggested double Wi-Fi Super Feeder package would be to order two feeders without timer and add this 2-pack Wi-Fi HS100 kit to the order.
How to operate the Super Feeder® with a cell phone, iPad, Android device or a home automation system via voice command like Alexa Home or other type like Google Assistant:
First, be sure to adjust your super feeder's desired portion size by plugging the power supply into a power outlet and adjusting the feed duration controller with the little supplied plastic screwdriver as explained in your feeder's manual or video. Then plug the power supply into the Smart Plug after you have installed it just like you would a lamp.
System we tested and recommend:
The TP-LINK® HS100 Smart Wi-Fi Plug is perfect to control your Super Feeder® remotely. It is one of the easiest we tested to install and use. Just follow directions included with the Smart Wi-Fi Plug. All you will need to do once installed is program suggested 2 minutes of "on" time for each feed cycle time of day you want. Make sure you program "on" and "off" time, i.e. 8:00 AM and off at 8:02 AM for each time of day you want to feed your pet. Also select all or certain days of the week you want to trigger your Super Feeder® to feed your pet. The feeder runs only for time in seconds you previously adjusted the feeder to give you the portion needed and then stops. You may of course trigger your Super Feeder® anytime by remotely turning it on for a few seconds and turning it back off yourself from your device. You may install and operate several Wi-Fi Plugs and feeders simultaneously in different places within range of local Wi-Fi. Note: The feeder must have been powered down for at least 2 minutes between feed cycles to assure it triggers again. If it has not been off long enough like repeatedly turning it on and off, the feeder will not work, which is normal. You could also control the Super Feeder® by voice command using this TP-LINK® Smart Plug compatible with Amazon Alexa®. The TP-LINK® Camera could be a great addition. Many ways to operate your Super Feeder®. This is what makes it so unique!
(These systems not included)
