Replacement protective chute cover for very early Super Feeder models CSF-3, CSF3XL, KSF-2, KSF-2XL.  If the actual chute opening "height" of your feeder where the food comes out is less than 1" high (actually 3/4") you have the early model. Late...

Please allow a couple of days if not readily in stock.  This customized hand-fitted special CSF-3 or CSF-3XL Super Feeder chute cover is to help keep that super mischievous and wise pet from extracting a few kibbles from the Super Feeder by sticking...

Extra picture of timer and bar multi-outlet is only an example showing the multi-outlet plug connected to the timer which is not included.  This multi-outlet plug adapter bar will allow you to operate two feeders at the very same time from only one...

FITS ALL SUPER FEEDERS!  Each cat or koi pond feeder package comes with two of these.  This extra or replacement clear extension is manufactured out of a polycarbonate material like used for race car windows and other applications...

This new special 2-cup capacity clear extension is manufactured out of a polycarbonate material like used for race car windows. The extension comes with a black powder coated metal strap, three 4-40 small retaining screws, 2 metal washers and two large...

2.1MM X 5.5MM Super Feeder 6' cord and jack plug (clipped wire at other end) LARGE QUANTITY ORDER AVAILABLE AT VERY DISCOUNTED PRICE.

If your distribution roller is not extracting food properly, you may need to replace it with this new roller. The life of the roller depends on the food you use. Easy to snap in. The roller comes with the large gear. All you will need to do is remove the...

These items are for replacing the existing slide and gate installed in the listed Super Feeders. The gate can just be snapped in or out. The slide with also snap in, but you will need to remove the bottom of the feeder to install it.

Replacement distribution slide and gate for the CSF-3 Cat Super Feeder. Easy to replace--just snap the old ones out and snap in the new ones. Note: This slide is a little shorther than the KSF-2 and ASF-1 slide and should be used in the cat feeder only.

Lid for 1.5 gallon hopper or Super Feeder--comes with two 4-40 screws and washers--Note: It is also available as a "blemished" item for $3.50--ask in "Comments" section of order form at time of order, and you will only be charged $3.50 at time order is...

This hardware bag includes a portion controller adjustment tool, all screws for a Super Feeder as well as the screws for the dedicated plastic mount and bowl to which the feeder can be mounted to. Hardware includes: 6 ea. 1/8" long small 4-40 screws and...

This 30' long cord is perfect to reach your outdoor or even indoor Super Feeder with a special screw-type sealed connector at one end to fit the outdoor powerpack's output and metal spade connectors at the other end to fit the feeder's auxiliary input...

This electronic board replaces all electronic boards in all Super Feeders. There will be some minor soldering required to hook up four wires to motor and alternate terminal strip. If your existing board has failed and you know that the motor is OK,...

This small relay (1"x5/8"x3/4") will switch up to 15 AMPS of current and will work with a voltage of 6 to 12 vdc at 405 ohms. It can be used with any of our dc timers or with our PCB1 solid state timer and will allow switching higher current loads that...

12 VDC RELAY READY TO USE COMES COMPLETE WITH WIRED SOCKET. IT HAS A SPDT RELAY MEANING THAT ONE SET OF CONTACTS IS CLOSED WHEN RELAY IS NOT ENERGIZED, AND THE OTHER SET IS OPEN WHILE NOT ENERGIZED. THE CONTACTS ARE RATED AT 30-40 AMPS.

Two sets of replacement Rubber plugs for all Super Feeders. NOTE ABOUT OUTDOOR USE:  Rubber parts, particularly the ones on the side of the feeder can shrink after very long exposure to sun rays and should be checked periodically to make sure...

This heavy-duty indoor black ABS mount has been specifically designed for the CSF-3 Cat/Small animal Super Feeder. It comes with a short vertical tower to fit the feeder's special metal bracket, a 10" x 11" platform with 4 rubber feet, and a new special...

This reset switch is the "normally open" type, meaning that you must push the switch to make contact and close your circuit. It is also a "momentary" type switch meaning that the switch will only be "on" as long as you push it. It has a 5' cord which...