Super Feeder Accessories

Brands

Shop by Brand

Shop by Price

Parts for super feeder including power supplies, motor, wire, gate and slide, roller, housing, floor, gear drive, clear extension, hopper, bracket, strap, lid and other parts--For feeders, check out various Super Feeder packages, basic and combos, available for special applications. Be sure to check out all pages listed at bottom of each page. Contact us for questions. Discounts

Current offering: FREE SHIPPING ON ALL ORDERS $99.00 or more (restricted to contiguous states) automatically applied to order when clicking "ADD TO CART."

2-Cup clear extension

Compare

Clear Extension--Tough Polycarbonate Material

$10.40

FITS ALL SUPER FEEDERS! Each cat or koi pond feeder package comes with two of these. This extra or replacement clear extension is manufactured out of a polycarbonate material like used for race car windows and other applications...

Clear Extension--Polycarbonate Material with Black Powder Coated Strap

Compare

Clear Extension--Polycarbonate Material with Black Powder Coated Strap

$14.90

This new special 2-cup capacity clear extension is manufactured out of a polycarbonate material like used for race car windows. The extension comes with a black powder coated metal strap, three 4-40 small retaining screws, 2 metal washers and two large...

Jack plug for Super Feeder with bare wire ends

Compare

Cord with Jack plug (surplus item) clipped wire ends

MSRP: $7.50

$5.00

2.1MM X 5.5MM Super Feeder 6' cord and jack plug (clipped wire at other end) LARGE QUANTITY ORDER AVAILABLE AT VERY DISCOUNTED PRICE.

Roller or drum for all super feeders

Compare

Distribution Roller and Large Gear for Super Feeder

$14.50

If your distribution roller is not extracting food properly, you may need to replace it with this new roller. The life of the roller depends on the food you use. Easy to snap in. The roller comes with the large gear. All you will need to do is remove the...

Slide and gate set for ASF-1 and KSF-2 Super Feeder

Compare

Distribution Slide and gate for ASF-1 and KSF-2 Super Feeders

MSRP: $11.00

$9.98

These items are for replacing the existing slide and gate installed in the listed Super Feeders. The gate can just be snapped in or out. The slide with also snap in, but you will need to remove the bottom of the feeder to install it.

Slide and gate set for CSF-3 and CSF-3XL Super Feeder

Compare

Distribution Slide and Gate for the CSF-3 Cat Super Feeder

$9.98

Replacement distribution slide and gate for the CSF-3 Cat Super Feeder. Easy to replace--just snap the old ones out and snap in the new ones. Note: This slide is a little shorther than the KSF-2 and ASF-1 slide and should be used in the cat feeder only.

Super feeder lid for dispenser, clear extensions and 1.5 gallon hopper

Compare

Lid--Super Feeder/Hopper Lid

$5.45

Lid for 1.5 gallon hopper or Super Feeder--comes with two 4-40 screws and washers--Note: It is also available as a "blemished" item for $3.50--ask in "Comments" section of order form at time of order, and you will only be charged $3.50 at time order is...

Hardware set for the super feeder and stand

Compare

Harware Bag For Super Feeder and Stand

$7.00

This hardware bag includes a portion controller adjustment tool, all screws for a Super Feeder as well as the screws for the dedicated plastic mount and bowl to which the feeder can be mounted to. Hardware includes: 6 ea. 1/8" long small 4-40 screws and...

long cord

Compare

ACAC-ODR-12Vac Outdoor Powerpack 30' Long Cord

$17.95

This 30' long cord is perfect to reach your outdoor or even indoor Super Feeder with a special screw-type sealed connector at one end to fit the outdoor powerpack's output and metal spade connectors at the other end to fit the feeder's auxiliary input...

Electronic board for all Super Feeders

Compare

PCB Electronic Board for All Super Feeders

MSRP: $49.00

$48.50

This electronic board replaces all electronic boards in all Super Feeders. There will be some minor soldering required to hook up four wires to motor and alternate terminal strip. If your existing board has failed and you know that the motor is OK,...

Rubber plugs for all super feeders

Compare

Rubber Plugs (2 sets)

$10.00

Two sets of replacement Rubber plugs for all Super Feeders. NOTE ABOUT OUTDOOR USE: Rubber parts, particularly the ones on the side of the feeder can shrink after very long exposure to sun rays and should be checked periodically to make sure...

stand and bowl for super feeder

Compare

Stand and Bowl for CSF-3 or CSF-3XL Super Feeder

MSRP: $46.00

$41.40

This heavy-duty indoor black ABS mount has been specifically designed for the CSF-3 Cat/Small animal Super Feeder. It comes with a short vertical tower to fit the feeder's special metal bracket, a 10" x 11" platform with 4 rubber feet, and a new special...

reset switch with cord

Compare

SRS-33/RESET SWITCH & 5' CORD (free ship)

$6.95

This reset switch is the "normally open" type, meaning that you must push the switch to make contact and close your circuit. It is also a "momentary" type switch meaning that the switch will only be "on" as long as you push it. It has a 5' cord which...

Blemished stand and bowl for super feeder

Compare

Stand and Bowl--blemished--for Super Feeder

$26.00

This indoor heavy-duty black ABS mount has been specifically designed for the CSF-3 Cat/Small animal Super Feeder. It is new, but may have a blemish or scratch here and there at an additional 40% off regular one. It comes with a short vertical tower to...

Out of stock

Stand for Super Feeder WITHOUT Bowl

Compare

Stand for Super Feeder WITHOUT Bowl

$31.00

This heavy-duty indoor black ABS mount has been specifically designed to mount the CSF-3 and CSF-3XL Cat/Small animal Super Feeders. It comes with a short vertical tower to fit the feeder's special metal bracket, and a 10" x 11" platform with 4 rubber...

Super Feeder bottom with drive gear and motor only

Compare

Super Feeder Base Only Without Electronics Board

$39.00

Super Feeder base only with drive gear including motor, rubber feet and alternate input terminal. You will need to solder 4 wires from PCB to motor and terminal strip.

Super Feeder bottom with gear drive, motor and PCB.

Compare

Super Feeder Floor Complete with Electronics and Gear Drive

$64.00

No need to purchase a new super feeder if yours has quit working. Quickest way to render your Super Feeder like new if upper housing is fine. This complete bottom is ready to slip into your present housing. You get a brand new electronics...

Early model upper complete housing

Compare

Super Feeder Housing Complete (standard early model)

MSRP: $54.00

$48.60

How to tell "standard" early model housing: Chute opening height where food comes out should be approximately less than 1 inch (3/4"). Complete Super Feeder housing with scraper and shaker wires, volume screw, gate, distribution slide, roller and large...

Compare up to 4 items:

Clear Selection

WE ACCEPT NEARLY ALL CREDIT CARDS AND EVEN OFFER PAYPAL, PAYPAL CREDIT, CHASE PAY, APPLE PAY AND AMAZON QUICK PAY--DON'T FORGET TO REVIEW DISCOUNTS/FREE SHIPPING PAGE FOR EXTRA SAVINGS!